Marble and Granite crystal hardening process

2009-04-23 09:21
Published in: "Nanjing was obtained to build a professional cleaning company cleaning"

 

      Stone pattern and acquired by virtue of their artificial polishing, it presents a beautiful and noble color, it has become the main hall decorated ancient and modern materials. In order to maintain the glorious halls of stone beautiful long-term, maintenance of stone that is ancient and has become a new long-term problems. As the continuous development of science and technology, stone maintenance more scientific and better technology, such as the maintenance of good stone to stone on the need to understand the types and characteristics.
      We are based on their chemical composition and crystal structure will be divided into two types of stone: marble and granite. Here is the hard crystalline marble and granite processing and routine maintenance.

Crystal hard granite processing:
1). Tools, equipment and materials
2). Depending on the hardness of granite and a daily passenger flow frequency and duration of up to 2 months to 1 year. (Subject to periodic maintenance)
3). Using the method
4). Daily maintenance

Marble crystal hardening process:
1). Tools, equipment and materials
2). Depending on the hardness of marble and a daily passenger flow frequency and duration of up to 2 months to 1 year (subject to regular maintenance).
3). Using the method
4). Daily maintenance

 

Crystal hard granite processing and routine maintenance methods:

1. Tools, equipment and materials:
Increase the machine, suction machine, scouring pad red, white polishing pad, watering can, signs, water from the wax, Italy Ibero-American hard granite crystal powder YM02, 2535 U.S. agents NCL bright granite, glass blowing washing device, wiping water heater, dust push, special add machine refurbished disc (standby), metering instrument.

2. Depending on the hardness of granite and a daily passenger flow frequency and duration of up to 2 months to 1 year. (Subject to periodic maintenance)

GHG STONE marble granite

3. Use:
First granite surface thoroughly cleaned to remove the existing conservation level. Ibero-American granite, the Italian grain hard water transferred into a paste powder coated in stone surface, with red polishing pad, using the heavier machine grinding, grinding process of adding a little amount of water to keep wet state (stone polishing to the semi-dry The micro-heat state, the best), based on different kinds of granite and wear 3-5 minutes repeated grinding, granite surface crystal with high optical surface brightness, using suction machine to quickly absorb the residual net ground paste, scraping washing with water dry, and then a white pad for polishing fine polishing, granite surface bright as new.

4. Daily maintenance:
① Push dust daily.
② abrasion maintenance: 1-2 times per week will increase the machine and the red pad (or a light steel wool # 100) in the United States NCL granite bright 2535's jet mill maintenance dose. 2535 will amount sprayed on the ground, to 1-2 square meters for each work area is appropriate. Add to machine even the agent roll out bright, fine polishing to light can be.
Note: steel wool should be kept clean, if there is dirt or treatment should be promptly replaced. Case of light-colored granite floors, should use a red buffing pad to prevent the steel wool black, so light-colored granite pollution.
③ local conservation priorities: at the door, the high frequency channel and walking lots, broken relatively serious nature, the monthly maintenance for local priorities. Ibero-American use of hard granite crystal powder YM02 partial re-grinding, and then bright agent 2535 NCL polished granite, stone restoration of the whole feeling of the lobby.

GHG STONE marble granite

 Hard crystalline marble processing and routine maintenance

1, tools, equipment and materials:
Ordinary single-wipe machine (heavier machine effect is better), suction machines, scouring pads red, white polishing pad, watering can, signs, from wax, Italian marble and crystal hard powder in US-Iran YM01, United States, 2501 NCL marble bright agent, dust push, glass blowing washing device, wiping water heaters, special cleaning machine refurbished disc (standby), metering instrument.

2, depending on the hardness of marble and a daily passenger flow frequency and duration of up to 2 months to 1 year (subject to regular maintenance).

3, using the method: first marble surfaces thoroughly cleaned to remove the existing conservation level, with crystal clear water will be hard marble powder transferred into a paste, painted in red its proper polishing pad, use wiping machine for grinding a small amount always maintain a semi-dry water-like sub-levels. According to wear different types of marble and repeated after 3-5 minutes of grinding, marble, crystal surface of high optical surface brightness. Suction machine used to quickly absorb the residual net ground paste, wash with water, dry scraping, and then use a white polishing pad for polishing fine polishing, marble surface, bright as new.

GHG STONE marble granite

4, daily maintenance:
① Push dust daily.
② abrasion maintenance: 1-2 times per week will increase the machine and the red pad (or 0 # 100 light steel wool) to the United States NCL marble bright 2501's jet mill maintenance dose. 2501 will amount sprayed on the ground, to 1-2 square meters for each work area is appropriate. Add to machine even the agent roll out bright, fine polishing to light can be.
Note: steel wool should be kept clean, if there is dirt should be promptly replaced. Case of light-colored marble floor, it should use a red buffing pad to prevent the steel wool black, so light-colored marble pollution.
③ local conservation priorities: at the door, the high frequency channel and walking lots, broken relatively serious nature, the monthly maintenance for local priorities. Ibero-American crystal using local grinding hard powder again, then agent 2501 NCL bright polished marble, stone restoration of the whole feeling of the lobby.

A wide range of natural stone, and each stone have different characteristics, even if the same name in stone, because of different origin, was different. Therefore, in the conservation process of stone according to the specific work experience with annual fine-tune the treatment.
 




Date: 10/09/19